Dòng Avanti JXN-30
Bao gồm tất cả các ứng dụng của máy ly tâm để sàn, Avanti® JXN-30 có tốc độ rôto 30.000 vòng/phút và RCF lớn hơn 100.000 x g. Những thách thức chính trong phòng thí nghiệm hàng ngày với các cấp độ liên kết mạng nâng cao, hiệu năng tin cậy và BioSafety* được cải thiện đều có trong Avanti JXN-30.
TSức mạnh bổ sung của ứng dụng MobileFuge mang lại sự linh hoạt hơn nữa, bao gồm khả năng:
- Truy cập và giám sát dữ liệu từ xa
- Nhận thông báo hệ thống qua email
- Quản lý các quyền
- Giải quyết vấn đề xử lý lỗi và nhiều vấn đề khác nữa thông qua mạng hoặc thiết bị di động
Avanti JXN-30 High Performance Centrifuge Features
Easy to use software
- Simultaneous display of set and actual run conditions
- Rotor selection by name (not code)
- 11 acceleration/12 deceleration rates
- Delay start
- Run times to 99:59, Hold, and ω2t integrator for applications requiring precise reproducibility
Powerful data management
- Up to 1,000 user-defined programs
- Storage for numerous protocols
- Password protection for up to 50 unique user profiles
- Networking capability for multiple instruments
- Data logging and real-time run graphing
15" LED Touchscreen Monitor
- Built to withstand 10 million touches
- Backlight life of 50,000 hours
- LED backlight for 20% power saving and environmental protection
Triple Redundant Safety Systems
- Windage, inertia, and rotor ID checks via magnets offer triple redundant safety
- Friction Reduction System (FRS) for quicker, quieter, and cooler runs
- High-torque, Switched Reluctance (SR) drive cycle for shorter cycle times
Explore Avanti JXN-30 Models
Technical Documents
Didn't find what you are looking for? For more results click
here.
Related Parts for Avanti JXN-30
J-LITE® JLA-12.500 BioCertified Fixed Angle Aluminum Rotor
For use in Avanti JXN-26 and JXN-30 high-performance centrifuges. Major applications: Large-volume and high-force. Ideal for protein precipitation and lysate clarification.
JA-30.50 Ti Fixed-Angle Titanium Rotor, Biosafety Lid- 8 x 50 mL, 30,000 rpm, 108,860 x g
The JA-30.50 Ti fixed-angle rotor is designed to hold up to eight 50-mL tubes at a 34-degree angle. Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-30.50 Ti rotor develops centrifugal forces that can efficiently pellet cells from large volumes, or cell particles from tissue homogenates. Short column methods (i.e., partially filled tubes) may also be used to purify large quantities of virus in a cushion gradient.
JA-30.50 Ti Fixed-Angle Titanium Rotor, Single Lock Lid- 8 x 50 mL, 30,000 rpm, 108,860 x g
The JA-30.50 Ti fixed-angle rotor is designed to hold up to eight 50-mL tubes at a 34-degree angle. Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-30.50 Ti rotor develops centrifugal forces that can efficiently pellet cells from large volumes, or cell particles from tissue homogenates. Short column methods (i.e., partially filled tubes) may also be used to purify large quantities of virus in a cushion gradient.
JA-12 Fixed-Angle Aluminum Rotor, Biosafety Lid- 12 x 50 mL, 12,000 rpm, 23,200 x g
The JA-12 fixed angle rotor, rated for 12,000 RPM, is designed to hold up to twelve 50-mL tubes at a 35-degree angle (see Figure 1). Used in Beckman Coulter J2 and Avanti® J series centrifuges, the JA-12 rotor develops centrifugal forces that can efficiently pellet cells, bacteria, and food products; separate proteins, viruses, and sub-cellular fractions, and do phase separation and binding studies.
JA-14.50 Fixed-Angle Aluminum Rotor, Biosafe, 16 x 50 mL conical, 14,000 rpm, 35,000 x g
16 x 50 ml conical rotor , 14.000 rpm, 35.000 x g
JA-14.50 Fixed-Angle Aluminum Rotor, 16 x 50 mL conical, 14,000 rpm, 35,000 x g
The JA-14.50 fixed-angle rotor is designed to hold up to sixteen 50-mL conical tubes at a 35-degree angle. Used in Beckman Coulter Avanti J series centrifuges, the JA-14.50 rotor develops centrifugal forces that can efficiently pellet cells, bacteria, and food products; separate proteins, viruses, and subcellular fractions, and do phase separation and binding studies.
JA-25.15 Fixed-Angle Rotor, Aluminum, 24 x 15 mL, 25,000 rpm, 74,200 x g
The JA-25.15 fixed-angle rotor is designed to hold up to twenty-four 15-mL tubes in two concentric rows at a 25-degree angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.
JA-25.15 Fixed-Angle Aluminum Rotor- 24 x 15 mL, 25,000 rpm, 74,200 x g
The JA-25.15 fixed-angle rotor is designed to hold up to twenty-four 15-mL tubes in two concentric rows at a 25-degree angle. Used in Beckman Coulter Avanti J (except Avanti J-E) and J2 series centrifuges, the JA-25.15 rotor develops centrifugal forces that are especially efficient in pelleting subcellular particles, bacteria, algae, and chloroplasts, or in short-column banding of viruses and subcellular particles.
JA-25.50 Fixed-Angle Rotor- Aluminum, 8 x 50 mL, 25,000 rpm, 75,600 x g
JA-25.50 Fixed-Angle Rotor with Single Lock Lid, Aluminum. Major applications: Harvesting bacteria, processing tissue homogenates, subcellular particulates, routine pelleting such as precipitates and phase separations. For use in Avanti J Series and J2 Series centrifuges.
JA-25.50 Fixed-Angle Aluminum Rotor, Biosafety Lid- 8 x 50 mL, 25,000 rpm, 75,600 x g
The JA-25.50 fixed-angle rotor is designed to hold up to eight 50-mL tubes at a 34-degree angle. Used in Beckman Coulter Avanti J and J2 series centrifuges, the JA-25.50 rotor develops centrifugal forces that can efficiently pellet cells from large volumes, or cell particles from tissue homogenates.
J-LITE(R) JLA-16.250 Fixed-Angle Aluminum Rotor, Single Lock- 6x250mL, 16,000 rpm, 38,400 x g
Major applications: General purpose, large-volume and multitube processing. Lightweight alternative to conventional 6x 250 rotors; empty rotor weight is 10.3 kg (22.7 lb). For use in Avanti J Series and J2 Series centrifuges.
JA-10 Fixed-Angle Aluminum Rotor- 6 x 500 mL, 10,000 rpm, 17,700 x g
JA-10 Fixed-Angle Rotor, Aluminum; Includes carrying handle. Major applications: Large-volume for initial processing of tissue homogenates and other large particles. For use in Avanti J Series and J2 Series centrifuges.
